Bombardier's Mirabel Plant Prepares for Final Assembly of Flight Test CSeries Aircraft
Bombardier has started work at its aircraft production facility in Mirabel, Québec, to accommodate final assembly of the first flight test CSeries aircraft. This is another step in the five-phased development of the Mirabel plant, which will ultimately double in size to some 860,000 square feet (79,897 square metres). Space optimization and re-tooling at the Mirabel facility, which began last month, will accommodate final assembly of the first CSeries aircraft required for the flight test and certification program. The Complete Integrated Aircraft Systems Test Area (CIASTA), the first area at the Mirabel plant developed for the CSeries aircraft program, is progressing on schedule, with the installation of systems rigs currently underway.
In addition, new buildings for the CSeries aircraft program will include a supplier satellite area; final assembly structural joining and pulse line areas; an area for pre-flight testing; paint shops; and a delivery and administrative centre.
Production, quality and ergonomic requirements are driving Bombardier’s technical approach to the final assembly of the CSeries aircraft. While they will be shorter than the 128-foot (39-metre)-long CRJ1000 NextGen regional jet, the largest aircraft currently produced at the Mirabel plant, the CSeries aircraft will have a fuselage with a larger diameter, their wings will be longer and their tails taller than those on the CRJ1000 NextGen aircraft. Bombardier will therefore employ different final assembly techniques to those used for its regional jets. As an example, two pairs of robots will be used to drill holes, apply sealant and install fasteners to join the major sections of the CSeries aircraft’s fuselage.
“Advanced robot technology will provide predictable repeatability, enhance quality and prevent ergonomic issues on the assembly line,” said Francois Minville, Vice President, CSeries Manufacturing, Bombardier Commercial Aircraft. “The fuselage of the CSeries aircraft is 12 feet (3.7 metres) in diameter, which presents an assembly challenge using our conventional methods. The benefit of the robots is they can work on the top, the side and underneath the aircraft without any limitations.”
A moving production line is being introduced at Bombardier’s St-Laurent Manufacturing Centre, where major components of the CSeries aircraft, such as the cockpit and aft fuselage, are being produced, and a moving final assembly line is planned for Mirabel. Compared to many other industries, aircraft manufacturing has traditionally been characterized as a low volume, long cycle time industry. The introduction of a moving final assembly line creates a dynamic environment that improves production efficiency.
To reduce the cycle time required to assemble a larger and more complex airliner, Bombardier is introducing advanced processes to ensure that high quality parts are received at the plant on time.
“We are enhancing our quality culture at Bombardier to support the production of the CSeries aircraft,” said Mr. Minville. “Through the sharing of knowledge and best practices, we are building on our experience with aircraft programs that involve risk-sharing suppliers and are refining our processes.”
Beginning with the development of the ultra long-range Global Express business jet in the mid-1990s, Bombardier has obtained considerable experience working with international partners and a global supply chain in building large structural aircraft components, such as wings and fuselages. To augment this experience, new advanced quality planning (AQP) and advanced logistics planning (ALP) processes are being introduced to identify potential areas of risk in manufacturing, systems integration and supply chain logistics on the CSeries aircraft program. The introduction of AQP and ALP highlights Bombardier’s embrace of preventive quality tools such as Process Control Plans, Mitigation Approach Plans, and Failure Mode Effects Analysis (FMEAs) commonly employed in the technology, health-care and automotive industries.
Bombardier teams started rolling out the advanced quality logistics planning methodology to suppliers on the CSeries aircraft program in 2010, and the system has now been deployed to
26 tier one suppliers at 46 manufacturing sites.
The CSeries aircraft, which are optimized for the single-aisle 100- to 149-seat market, will deliver the lowest operating costs in their class, exceptional operational flexibility, widebody comfort and an unmatched environmental scorecard. Bombardier’s goal is to capture up to half of its forecasted market demand for 6,700 aircraft in the 100- to 149-seat commercial aircraft market segment. This segment is valued at $393 billion over the next 20 years.
Bombardier has launched 28 new aircraft programs since 1989, including business, commercial and special mission aircraft. The company’s continued investments in engineering and manufacturing excellence have helped established it as the world’s third largest civil aircraft manufacturer.
About Bombardier
A world-leading manufacturer of innovative transportation solutions, from commercial aircraft and business jets to rail transportation equipment, systems and services, Bombardier Inc. is a global corporation headquartered in Canada. Its revenues for the fiscal year ended January 31, 2011, were $17.7 billion, and its shares are traded on the Toronto Stock Exchange (BBD). Bombardier is listed as an index component to the Dow Jones Sustainability World and North America indexes. News and information are available at www.bombardier.com or follow us on Twitter @BombardierInc.
Source: Bombardier
